Friday, February 15, 2019

OK guys, Justin needs all the help he can get.

Gentlemen, I'm at that point where one has to make the thing steer in the desired direction. Been trying to loose the masive camber of -4 and get more caster than +5. Now I've run out of rod end thread on the front rose joints.
I've been told by the guy that "re fabricated" the bottom and top arms that you can adjust the caster by moving the long bolt that goes through the chassis mounting of the top arm. I'm in the process of working this out, but before I head off in the wrong direction I thought I should ask for any guidence from the people that know.
Pictures attached. I gather my top arms are not original but the mounting into the chassis is "as far as I know"
Help
Justin

No comments: